Custom Transformer Cooling Fan Motor
The electric motors used in California Turbo transformer cooling fans are supplied with 406 stainless steel shafts for ease of maintenance, extended length shafts for superior support of the propeller, and removable condensation drain plugs to provide longer bearing life. Motors are rated for dual voltage: 115/208-230 V, single phase or 208-230/460 V, three phase, 50 or 60 Hertz operation. All of our motors are manufactured to NEMA MG-1 standards which requires those motors to provide their full nameplate horsepower at ±10% of their nameplate voltage, ±5% of their nameplate frequency.
California Turbo considers the following motors standard and keeps a supply on hand:
As you are aware, there are many different electrical currents in use in countries throughout the world. The customer may specify any commonly adopted supply voltage. The voltages are listed in "Electric Current Abroad". Any voltage and frequency combination listed in this document may be specified. Minimum order quantities and additional lead time may be required.
IP55 Motors are available for a slight additional cost. In addition to the standard features listed above, these motors also feature a double lip seal, four cover screws on the connector box which also has a neoprene gasket. IP55 Ingress Protection has been tested by a certified, independent 3rd party laboratory.
Other custom features that have been delivered:
10721 Business Drive, Fontana, CA 92337 USA
Phone: 909-854-2800 or 800-448-1446
Welcome to California Turbo and thank you for visiting our website.